Ignition Recall "KEYS"

[mdishong]

PC+: I HAD 2 MIS-CUT KEYS FOR THE SAME VIN CUT BY CODE (TOO DEEP). CALLED THE 1-888 # FOR PC+ & THEY MADE A DEPTH ADJUSTMENT. I WILL TEST ON THE NEXT KIT TO SEE IF IT WORKED, BUT ACCORDING TO THEM...THIS IS THEIR CURRANT FIX.

[CANITLK2APRTSGUY]

Okay for any of you who may run into this, the other dealers machine cut it perfect by the depths I gave to them, so I called the key machine tech line ppl and she said they have seen this quite a few times and we did change the depth number...Thanks for all your responses

[MIKE1010]

I type the codes into the d2d key code look up tab. It will give you tumbler cuts. I compare to old key before i cut. I print it out and give to tech.

[PARTSPHIL]

I compare to old key before i cut.

That is great advice right there! If only I had thought about this yesterday. Cut keys by code.....didnt work. Ran VIS and this vehicle was originally a fleet vehicle. I am sure somewhere along the way the cylinders were changed out. Now I have spent about 2 hours on the phone (on hold) with PQC trying to order new keys..........

[MultiLineManager]

PC+: I HAD 2 MIS-CUT KEYS FOR THE SAME VIN CUT BY CODE (TOO DEEP). CALLED THE 1-888 # FOR PC+ & THEY MADE A DEPTH ADJUSTMENT. I WILL TEST ON THE NEXT KIT TO SEE IF IT WORKED, BUT ACCORDING TO THEM...THIS IS THEIR CURRANT FIX.

Can you give me the 800# for PC+? The one I have is no longer in service and all of my messages to the other numbers I have found go unanswered.

[Denise Trimble]

The very first one we did must have had a different column put in from a wreckyard, but we were able to read the code on the ign cyl. Customer was fine with not having a door key, he said he hadn't had one since they changed the column! O.K. Then.....

[bigmac]

I had one car the keycode was wrong. I had to cut the keys from the old worn out key and code the cylinder to fit. First key I cut wouldn't work. So I called and ordered one key. Next day I got a kit in without anything in the box. I called and got another kit ordered. Today I got the kit in, they sent individual parts (switch, cylinder, rings and 2 keys), but the order number for the 2 keys is the order number for the one miss cut key. Bet I get screwed out of my other key.